https://ride-engineering.com Thu, 14 Aug 2025 00:00:00 EST en-us https://ride-engineering.com/BETA-Rubber-Mounted-Split-Triple-Clamp-Set-205mm-Offset--USED_p_2123.html Thu, 14 Aug 2025 00:00:00 EST Used set comes complete with bar mounts and all mounting hardware.Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 2mm back from stock center position for a better rider triangle. Ride ...[Read More]
Our Price: $425.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/BETA-Rubber-Mounted-Split-Triple-Clamp-Set-205mm-Offset--USED_p_2123.html Used set comes complete with bar mounts and all mounting hardware.Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 2mm back from stock center position for a better rider triangle. Ride ...[Read More]
Our Price: $425.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/CRF-Axle-nut-and-washer-kit-for-KTMHUSGAS-axle-blocks-25mm-Axle_p_1727.html Thu, 14 Aug 2025 00:00:00 EST CRF450 axle (42301-KRN-A30), nut (90305-KZ4-J20) and washer (90401-KZ4-J20) included in kit. Must use this 25mm axle with Ride Engineering KTM, Husqvarna and GasGas axle Blocks. ...[Read More]
Our Price: $70.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/CRF-Axle-nut-and-washer-kit-for-KTMHUSGAS-axle-blocks-25mm-Axle_p_1727.html CRF450 axle (42301-KRN-A30), nut (90305-KZ4-J20) and washer (90401-KZ4-J20) included in kit. Must use this 25mm axle with Ride Engineering KTM, Husqvarna and GasGas axle Blocks. ...[Read More]
Our Price: $70.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Nissin-11mm-Front-Master-Cylinder-Assembly--Red_p_2070.html Thu, 14 Aug 2025 00:00:00 EST 2025 CRF450r complete master cylinder assembly to be used with the Ride Engineering front brake caliper on 2008+ Yamaha YZ125/YZ250 and YZ250F/450F/FX/WR or KTM 125-500 (Brembo), Husqvarna 125-500 (Brembo, Magura or BrakTec), GasGas 125-500 (Brembo ...[Read More]
Our Price: $280.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Nissin-11mm-Front-Master-Cylinder-Assembly--Red_p_2070.html 2025 CRF450r complete master cylinder assembly to be used with the Ride Engineering front brake caliper on 2008+ Yamaha YZ125/YZ250 and YZ250F/450F/FX/WR or KTM 125-500 (Brembo), Husqvarna 125-500 (Brembo, Magura or BrakTec), GasGas 125-500 (Brembo ...[Read More]
Our Price: $280.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-22-Offset-Honda-Split-Triple-Clamp-Set--used_p_2002.html Thu, 14 Aug 2025 00:00:00 EST These stock offset crf250r/450r split triple clamps were used 1 hours for testing and in great condition. These split CRF Triple Clamps have been completely updated for added flex and comfort, with a larger profile top clamp (for better handling & le...[Read More]
Our Price: $450.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-22-Offset-Honda-Split-Triple-Clamp-Set--used_p_2002.html These stock offset crf250r/450r split triple clamps were used 1 hours for testing and in great condition. These split CRF Triple Clamps have been completely updated for added flex and comfort, with a larger profile top clamp (for better handling & le...[Read More]
Our Price: $450.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-22MM-Offset-00-08-CRCRF-Split-Triple-Clamp-Set--Damaged_p_2122.html Thu, 14 Aug 2025 00:00:00 EST A customer decided to pry these clamps open when they didn't fit his bike instead of just calling us and letting us know about the issue. We reworked them the best we could and they should still work on the application they were designed for. Normall...[Read More]
Our Price: $250.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-22MM-Offset-00-08-CRCRF-Split-Triple-Clamp-Set--Damaged_p_2122.html A customer decided to pry these clamps open when they didn't fit his bike instead of just calling us and letting us know about the issue. We reworked them the best we could and they should still work on the application they were designed for. Normall...[Read More]
Our Price: $250.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Showa-24mm-Steering-Dampener_p_1774.html Thu, 14 Aug 2025 00:00:00 EST Honda introduced the 24mm Showa damper in 2011. The larger piston provides more resistance and comes with 5W oil from the factory. Good choice if you are getting it re-valved by a suspension company or changing the oil to 20W. ...[Read More]
Our Price: $400.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Showa-24mm-Steering-Dampener_p_1774.html Honda introduced the 24mm Showa damper in 2011. The larger piston provides more resistance and comes with 5W oil from the factory. Good choice if you are getting it re-valved by a suspension company or changing the oil to 20W. ...[Read More]
Our Price: $400.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/2024-KX450-2025-KX250-Split-Triple-Clamp-Set--22mm-offset-Used_p_2125.html Thu, 14 Aug 2025 00:00:00 EST Designed for the 2024-2025 KX450 and 2025 KX250 chassis. Like new condition, these clamps were used 2 hours for testing. These Ride Eng. triple clamps have been revised and made stiffer to work better on the new 2024 chassis. The 22mm offset puts mor...[Read More]
Our Price: $500.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/2024-KX450-2025-KX250-Split-Triple-Clamp-Set--22mm-offset-Used_p_2125.html Designed for the 2024-2025 KX450 and 2025 KX250 chassis. Like new condition, these clamps were used 2 hours for testing. These Ride Eng. triple clamps have been revised and made stiffer to work better on the new 2024 chassis. The 22mm offset puts mor...[Read More]
Our Price: $500.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/BETA-Rubber-Mounted-Split-Triple-Clamp-Set-22mm-Offset--USED_p_2124.html Thu, 14 Aug 2025 00:00:00 EST Used set complete with bar mounts and all mounting hardware. Normally sold at $905. Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 2mm back from stock center position for a better rid...[Read More]
Our Price: $475.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/BETA-Rubber-Mounted-Split-Triple-Clamp-Set-22mm-Offset--USED_p_2124.html Used set complete with bar mounts and all mounting hardware. Normally sold at $905. Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 2mm back from stock center position for a better rid...[Read More]
Our Price: $475.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/NEW-KTMHUSGAS-Swingarm-Conversion-Kit_p_2127.html Thu, 14 Aug 2025 00:00:00 EST This hardware kit will retrofit our 2025 KTM full performance linkage onto a 2023 or 2024 model. It provides ultra plush shock action with less rigidity from the smaller diameter 2025 hardware. Use with KT-LKN25-BA, KT-LKN25-GE OR KT-LKA5-MB. Include...[Read More]
Our Price: $225.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/NEW-KTMHUSGAS-Swingarm-Conversion-Kit_p_2127.html This hardware kit will retrofit our 2025 KTM full performance linkage onto a 2023 or 2024 model. It provides ultra plush shock action with less rigidity from the smaller diameter 2025 hardware. Use with KT-LKN25-BA, KT-LKN25-GE OR KT-LKA5-MB. Include...[Read More]
Our Price: $225.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-22mm-Offset--Silver_p_2039.html Thu, 14 Aug 2025 00:00:00 EST Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-22mm-Offset--Silver_p_2039.html Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By gripping the forks 12mm higher on the tubes, adding a half millimeter more offset, and provisions for mounting a Showa damper, the bike is transformed to a more forgiving, less twitchy, more plush motorcycle while still handling just as good as before. Recommended for Desert Racing(DR); Motocross (MX); World Off-road Championship Series (WORCS) and Supercross (SX). Made from 2024 aluminimum these clamps are stronger and lighter than stock (saves 4.5 oz). New split design allows for a lower torque spec. Each set comes complete with stem and lower bearing for an easy installation. There are four Showa dampers available from $275-$375 and the upper mounting bracket is $69.95. Lower mounting point is built into the bottom triple clamp. Comes with pinch bolts.

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-RED-22mm-Offset--Red_p_1831.html Thu, 14 Aug 2025 00:00:00 EST Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-RED-22mm-Offset--Red_p_1831.html Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> https://ride-engineering.com/NEW-WP-Steering-Damper-Kit_p_2050.html Thu, 14 Aug 2025 00:00:00 EST The new WP Damper has 30 clicks of adjustability as compared to 14 clicks (Showa Damper) giving it a wide range of adjustability and more resistance than the Showa Damper. Comes with a pair of stainless steel sleeves which makes it compatible with al...[Read More]
Our Price: $420.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/NEW-WP-Steering-Damper-Kit_p_2050.html The new WP Damper has 30 clicks of adjustability as compared to 14 clicks (Showa Damper) giving it a wide range of adjustability and more resistance than the Showa Damper. Comes with a pair of stainless steel sleeves which makes it compatible with al...[Read More]
Our Price: $420.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-22mm-Offset--Black_p_1829.html Thu, 14 Aug 2025 00:00:00 EST Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-22mm-Offset--Black_p_1829.html Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-22mm-Offset--Blue_p_1830.html Thu, 14 Aug 2025 00:00:00 EST Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> https://ride-engineering.com/Ride-Eng-2013-RMZ-Split-Triple-Clamp-Set-22mm-Offset--Blue_p_1830.html Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By grippin...[Read More]
Our Price: $472.43 On Sale [Add to Cart]

]]> Revised to work with the 49mm Showa spring fork and the new 2018+ chassis. Benefits over the stock triple clamps include being stabilizer compatible, 0.5mm more offset (stock offset 21.5mm), and a higher fork gripping area to improve flex. By gripping the forks 12mm higher on the tubes, adding a half millimeter more offset, and provisions for mounting a Showa damper, the bike is transformed to a more forgiving, less twitchy, more plush motorcycle while still handling just as good as before. Recommended for Desert Racing(DR); Motocross (MX); World Off-road Championship Series (WORCS) and Supercross (SX). Made from 2024 aluminimum these clamps are stronger and lighter than stock (saves 4.5 oz). New split design allows for a lower torque spec. Each set comes complete with stem and lower bearing for an easy installation. There are four Showa dampers available from $275-$375 and the upper mounting bracket is $69.95. Lower mounting point is built into the bottom triple clamp. Comes with 8 pinch bolts.

]]> https://ride-engineering.com/YZ250-Axle-nut-and-washer-kit-for-KTMHUS-axle-blocks-22mm-Axle_p_2003.html Thu, 14 Aug 2025 00:00:00 EST YZ250 axle (1C3-25381-90-00), nut (90185-20002-00) and washer (90201-20020-00) included in kit. Must use this 22mm axle with Ride Engineering KTM, Husqvarna and GasGas axle Blocks. ...[Read More]
Our Price: $95.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/YZ250-Axle-nut-and-washer-kit-for-KTMHUS-axle-blocks-22mm-Axle_p_2003.html YZ250 axle (1C3-25381-90-00), nut (90185-20002-00) and washer (90201-20020-00) included in kit. Must use this 22mm axle with Ride Engineering KTM, Husqvarna and GasGas axle Blocks. ...[Read More]
Our Price: $95.00 On Sale [Add to Cart]

]]> https://ride-engineering.com/SALE-BLUE-16-KXF-Billet-Axle-Blocks_p_1857.html Thu, 14 Aug 2025 00:00:00 EST Precision machined for a better swingarm fit and more accurate chain alignment. Reduces rocking 2.5mm longer than stock keeps chain adjustment bolts less extended. Provides two M8 hex nuts to double lock adjustment bolts and keep them from loosening....[Read More]
Our Price: $29.95 On Sale [Add to Cart]

]]> https://ride-engineering.com/SALE-BLUE-16-KXF-Billet-Axle-Blocks_p_1857.html Precision machined for a better swingarm fit and more accurate chain alignment. Reduces rocking 2.5mm longer than stock keeps chain adjustment bolts less extended. Provides two M8 hex nuts to double lock adjustment bolts and keep them from loosening....[Read More]
Our Price: $29.95 On Sale [Add to Cart]

]]> https://ride-engineering.com/SALE-2010-YZ450F-2014-YZ250F-Billet-Axle-Blocks-Red_p_1913.html Thu, 14 Aug 2025 00:00:00 EST precision machined for a better swingarm fit, 6mm longer than stock. We also provide two M8 hex nuts to double lock the adjustment bolts and keep them from loosening. Anodized Red. (on sale while supplies last) ...[Read More]
Our Price: $29.95 On Sale [Add to Cart]

]]> https://ride-engineering.com/SALE-2010-YZ450F-2014-YZ250F-Billet-Axle-Blocks-Red_p_1913.html precision machined for a better swingarm fit, 6mm longer than stock. We also provide two M8 hex nuts to double lock the adjustment bolts and keep them from loosening. Anodized Red. (on sale while supplies last) ...[Read More]
Our Price: $29.95 On Sale [Add to Cart]

]]>