https://ride-engineering.com Fri, 15 Aug 2025 00:00:00 EST en-us https://ride-engineering.com/KTMHUSQGASBETATRIUMPH-Rubber-Mounted-Bar-Mount-_p_1602.html Fri, 15 Aug 2025 00:00:00 EST This OEM and Ride Engineering replacement Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount. Precision machined from aircraft quality aluminum, there is a 6mm difference between the forward and back...[Read More]
Our Price: $99.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHUSQGASBETATRIUMPH-Rubber-Mounted-Bar-Mount-_p_1602.html This OEM and Ride Engineering replacement Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount. Precision machined from aircraft quality aluminum, there is a 6mm difference between the forward and back...[Read More]
Our Price: $99.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHUSQTRIUMPH-Bar-Mount-Fastener-Kit_p_1608.html Fri, 15 Aug 2025 00:00:00 EST This kit has all the replacement hardware that holds the stock ktm, husqvarna and triumph bar mount onto the stock billet aluminum triple clamps. (included: two M10 Cap screws, four polyurethane cones, two custom machined threaded sleeves). Use with ...[Read More]
Our Price: $59.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHUSQTRIUMPH-Bar-Mount-Fastener-Kit_p_1608.html This kit has all the replacement hardware that holds the stock ktm, husqvarna and triumph bar mount onto the stock billet aluminum triple clamps. (included: two M10 Cap screws, four polyurethane cones, two custom machined threaded sleeves). Use with ...[Read More]
Our Price: $59.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHUSQTRIUMPHBETA-Bar-Mount-Spacers_p_1609.html Fri, 15 Aug 2025 00:00:00 EST Raises Ride Eng. bar mount 5mm taller than stock on KTM/HUS/GAS models. The spacer is 7mm tall to compensate for our bar mount being 2mm lower than stock on these models. For use with Ride Eng. (KT-BBM00-CA; KT-BBM23-CA & KT-BBM24-CA) for rubber moun...[Read More]
Our Price: $24.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHUSQTRIUMPHBETA-Bar-Mount-Spacers_p_1609.html Raises Ride Eng. bar mount 5mm taller than stock on KTM/HUS/GAS models. The spacer is 7mm tall to compensate for our bar mount being 2mm lower than stock on these models. For use with Ride Eng. (KT-BBM00-CA; KT-BBM23-CA & KT-BBM24-CA) for rubber moun...[Read More]
Our Price: $24.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHusq-Triumph-Polyurethane-Cones-Firm_p_1656.html Fri, 15 Aug 2025 00:00:00 EST These cones are made from polyurethane which is a 30% firmer material than stock with good dampening characteristics. Fit all ktm, husqvarna and triumph rubber mounted stock billet aluminum triple clamps 2015-2022 and all Ride Engineering KTM/Husq/Ga...[Read More]
Our Price: $24.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHusq-Triumph-Polyurethane-Cones-Firm_p_1656.html These cones are made from polyurethane which is a 30% firmer material than stock with good dampening characteristics. Fit all ktm, husqvarna and triumph rubber mounted stock billet aluminum triple clamps 2015-2022 and all Ride Engineering KTM/Husq/Ga...[Read More]
Our Price: $24.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHusky-Triumph-Polyurethane-Cones-Soft_p_2052.html Fri, 15 Aug 2025 00:00:00 EST These cones are made from polyurethane which is a more durable material than stock with similar dampening characteristics as the stock rubber version and 30% softer than our red cone kit. Installation and disassembly is far easier with these because ...[Read More]
Our Price: $24.95 [Add to Cart]

]]> https://ride-engineering.com/KTMHusky-Triumph-Polyurethane-Cones-Soft_p_2052.html These cones are made from polyurethane which is a more durable material than stock with similar dampening characteristics as the stock rubber version and 30% softer than our red cone kit. Installation and disassembly is far easier with these because ...[Read More]
Our Price: $24.95 [Add to Cart]

]]> https://ride-engineering.com/NEW-ScottsGPR-Compatible-Bar-Mount-for-KTMHusGasBetaTri_p_2105.html Fri, 15 Aug 2025 00:00:00 EST This Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount with an adjustable plate that will hold a Scott's or GPR steering damper. Bar mount height remains the same as stock and the bar position can b...[Read More]
Our Price: $119.95 [Add to Cart]

]]> https://ride-engineering.com/NEW-ScottsGPR-Compatible-Bar-Mount-for-KTMHusGasBetaTri_p_2105.html This Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount with an adjustable plate that will hold a Scott's or GPR steering damper. Bar mount height remains the same as stock and the bar position can b...[Read More]
Our Price: $119.95 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-22mm-stock-Offset--Black_p_2113.html Fri, 15 Aug 2025 00:00:00 EST Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position is same as stock in the back position and 2mm back of stock in the forward position but we offer optional 6mm offset bases for our bar m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-22mm-stock-Offset--Black_p_2113.html Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position is same as stock in the back position and 2mm back of stock in the forward position but we offer optional 6mm offset bases for our bar m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-22mm-stock-Offset--Silver_p_2114.html Fri, 15 Aug 2025 00:00:00 EST Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position is same as stock in the back position and 2mm back of stock in the forward position but we offer optional 6mm offset bases for our bar m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-22mm-stock-Offset--Silver_p_2114.html Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position is same as stock in the back position and 2mm back of stock in the forward position but we offer optional 6mm offset bases for our bar m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-205mm-Offset--Silver-_p_2115.html Fri, 15 Aug 2025 00:00:00 EST These 20.5 mm offset Ride Eng. split triple clamps place more weight on the front wheel and quicken turn in. They have been designed with four goals in mind: 1) Optimize body position: Bar position is 1.5mm back of stock in the back position and 5.5m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-205mm-Offset--Silver-_p_2115.html These 20.5 mm offset Ride Eng. split triple clamps place more weight on the front wheel and quicken turn in. They have been designed with four goals in mind: 1) Optimize body position: Bar position is 1.5mm back of stock in the back position and 5.5m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-205mm-Offset--Black_p_2116.html Fri, 15 Aug 2025 00:00:00 EST These 20.5 mm offset Ride Eng. split triple clamps place more weight on the front wheel and quicken turn in. They have been designed with four goals in mind: 1) Optimize body position: Bar position is 1.5mm back of stock in the back position and 5.5m...[Read More]
Our Price: $799.90 [Add to Cart]

]]> https://ride-engineering.com/NEW-TRIUMPH-Rubber-Mounted-Split-Triple-Clamp-Set-205mm-Offset--Black_p_2116.html These 20.5 mm offset Ride Eng. split triple clamps place more weight on the front wheel and quicken turn in. They have been designed with four goals in mind: 1) Optimize body position: Bar position is 1.5mm back of stock in the back position and 5.5m...[Read More]
Our Price: $799.90 [Add to Cart]

]]>