Ride Engineering, Inc.:

KTM/HUSQ/GAS/BETA/TRIUMPH Rubber Mounted Bar Mount

Fri, 15 Aug 2025 00:00:00 EST

This OEM and Ride Engineering replacement Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount. Precision machined from aircraft quality aluminum, there is a 6mm difference between the forward and back...[Read More]
Our Price: $99.95 [Add to Cart]

2016-22 KTM/HUSQ 6mm offset bases

Fri, 15 Aug 2025 00:00:00 EST

These 6MM offset bases allow you to bring your Ride Eng. bar mount an extra 3mm closer or further away from your body. For use with Ride Eng. KTM and Husqvarna oversized bar mounts (KT-BBM00-CA) only. ...[Read More]
Our Price: $39.95 [Add to Cart]

KTM/HUSQ/TRIUMPH Bar Mount Fastener Kit

Fri, 15 Aug 2025 00:00:00 EST

This kit has all the replacement hardware that holds the stock ktm, husqvarna and triumph bar mount onto the stock billet aluminum triple clamps. (included: two M10 Cap screws, four polyurethane cones, two custom machined threaded sleeves). Use with ...[Read More]
Our Price: $59.95 [Add to Cart]

KTM/HUSQ/TRIUMPH/BETA Bar Mount Spacers

Fri, 15 Aug 2025 00:00:00 EST

Raises Ride Eng. bar mount 5mm taller than stock on KTM/HUS/GAS models. The spacer is 7mm tall to compensate for our bar mount being 2mm lower than stock on these models. For use with Ride Eng. (KT-BBM00-CA; KT-BBM23-CA & KT-BBM24-CA) for rubber moun...[Read More]
Our Price: $24.95 [Add to Cart]

22mm Offset 2013-22 KTM/HUSQ & 23 off-road models, 21-23 GASGAS Rubber Mounted Split Triple Clamp Set - Silver

Fri, 15 Aug 2025 00:00:00 EST

Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 3mm back from stock for a better rider triangle. Ride Eng. also offers optional offset bases for our bar mounts providing 4 bar position...[Read More]
Our Price: $799.90 [Add to Cart]

22mm Offset 2013-22 KTM/HUSQ & 23 off-road models; 21-23 GAS Rubber Mounted Split Triple Clamp Set - Black

Fri, 15 Aug 2025 00:00:00 EST

22mm Offset 2013-22 KTM & 23 off-road models Rubber Mounted Split Triple Clamp Set - Orange

Fri, 15 Aug 2025 00:00:00 EST

22mm Offset 2013-22 KTM/HUSQ & 23 off-road models, 21-23 GAS Rubber Mounted Split Triple Clamp Set Limited Edition - Blue

Fri, 15 Aug 2025 00:00:00 EST

22mm Offset 2021-23 GASGAS, 13-22 KTM/HUSQ & 23 off-road models Rubber Mounted Split Triple Clamp Set - Red

Fri, 15 Aug 2025 00:00:00 EST

KTM/HUSKY/GASGAS Rubber Mounted Silver Top Clamp with Scott's/GPR Compatible Bar Mount

Fri, 15 Aug 2025 00:00:00 EST

This Ride Eng. top clamp have been designed to insulate the handlebars from vibration and reduce hand fatigue. Fits most KTM/Husky solid mounted off-road models. Comes with Ride Eng. bar mount MX-SM100-00 which is Scott's and GPR (V1, V2, V4) steerin...[Read More]
Our Price: $334.90 [Add to Cart]

KTM/HUSKY/GASGAS TOP Clamp - Silver

Fri, 15 Aug 2025 00:00:00 EST

This Ride Eng. top clamp have been designed to insulate the handlebars from vibration and reduce hand fatigue. Fits most KTM/Husky solid mounted off-road models. Must be used with Ride Eng. standard bar mounts KX-BBM00-CA or MX-SM100-00 which is Scot...[Read More]
Our Price: $199.95 [Add to Cart]

KTM/HUSKY/GASGAS TOP Clamp - Black

Fri, 15 Aug 2025 00:00:00 EST

KTM/HUSKY/GAS Rubber Mounted Black Top Clamp with Scott's/GPR Compatible Bar Mount

Fri, 15 Aug 2025 00:00:00 EST

Pinch Bolt Kit

Fri, 15 Aug 2025 00:00:00 EST

Kit includes four M8 x 1.25 x 45mm (bottom clamp) and four M8 x 1.25 x 40mm (top clamp) long hex flange bolts. Fit all Ride Eng. triple clamps....[Read More]
Our Price: $9.95 [Add to Cart]

KTM/Husq &Triumph Polyurethane Cones Firm

Fri, 15 Aug 2025 00:00:00 EST

These cones are made from polyurethane which is a 30% firmer material than stock with good dampening characteristics. Fit all ktm, husqvarna and triumph rubber mounted stock billet aluminum triple clamps 2015-2022 and all Ride Engineering KTM/Husq/Ga...[Read More]
Our Price: $24.95 [Add to Cart]

GASGAS/KTM/HUSKY/BETA/SHERCO Replacement Rigid Mount Bar Mount for Stock Triple Clamps

Fri, 15 Aug 2025 00:00:00 EST

This OEM replacement Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount. Precision machined from aircraft quality aluminum, there is a 6mm difference between the forward and back mounting positions. ...[Read More]
Our Price: $99.95 [Add to Cart]

KTM/HUSQ/GAS Lower Stabilizer Bracket

Fri, 15 Aug 2025 00:00:00 EST

This bracket is sold separately for customers that want to install a Showa damper with a welded on upper mounting point. Steering Head Stabilizer Bracket Kit and Showa dampener sold separately. ...[Read More]
Our Price: $29.95 [Add to Cart]

KTM/HUSKY/GAS/Beta Steering Head Stabilizer Bracket Kit

Fri, 15 Aug 2025 00:00:00 EST

Ride Engineering was the first company to offer a way to mount the Showa steering stabilizer onto Yamahas, Suzukis, KTMs, Husqvarnas and GasGas models. This MX style damper was originally developed by Ricky Carmichael in his days as a factory Honda r...[Read More]
Our Price: $219.95 [Add to Cart]

RMZ/KX Replacement Bar Mount Posts

Fri, 15 Aug 2025 00:00:00 EST

Replacement posts are made from surgical stainless steel. sold in pairs. ...[Read More]
Our Price: $24.95 [Add to Cart]

Rubber Mount Fastener Kit

Fri, 15 Aug 2025 00:00:00 EST

Kit includes two M10 x 1.25 Fuji Locking Hex Nuts and two M10 x 25mm Fender Washers. ...[Read More]
Our Price: $7.95 [Add to Cart]

7" Bar Pad

Fri, 15 Aug 2025 00:00:00 EST

This Ride Eng. bar pad is designed to fit our One-Piece Oversized Bar Mounts perfectly. Works on all tapered handlbars. Extremely light weight at 1.8oz saves 3 or more oz over many of our competitor's brands....[Read More]
Our Price: $24.95 [Add to Cart]

Cross Bar Kit

Fri, 15 Aug 2025 00:00:00 EST

This product allows the rider to place a cross bar over a scott's or gpr steering damper that is installed above the handlebars. Advantages to above the bar dampers is that it will not affect bar mount adjustability (forward or back) and will not rai...[Read More]
Our Price: $149.95 [Add to Cart]

Hour Meter Relocation Bracket

Fri, 15 Aug 2025 00:00:00 EST

If you're upgrading your triple clamps or having difficulty reading your stock hour meter (hidden behind the bar pad), use this kit to mount it to the left side of the frame. All mounting hardware is included. ...[Read More]
Our Price: $14.95 [Add to Cart]

Showa 24mm Steering Dampener

Fri, 15 Aug 2025 00:00:00 EST

Honda introduced the 24mm Showa damper in 2011. The larger piston provides more resistance and comes with 5W oil from the factory. Good choice if you are getting it re-valved by a suspension company or changing the oil to 20W. ...[Read More]
Our Price: $400.00 On Sale [Add to Cart]

KX/KXF Bar Mount for Scott's & GPR Stabilizers and Ride Eng. KTM/Husky/Gas Top Clamp

Fri, 15 Aug 2025 00:00:00 EST

This Bar Mount has a one-piece top that is designed to resist bending much better than the stock bar mount with an adjustable plate that will hold a Scott's or GPR steering damper. Bar mount height remains the same as stock and the bar position can b...[Read More]
Our Price: $134.95 [Add to Cart]

RM Polyurethane Cones Firm

Fri, 15 Aug 2025 00:00:00 EST

These polyurethane cones are harder than stock to reduce handlebar twist while still providing good dampening characteristics. They will work on all Ride Eng. RM/RMZ triple clamps; Ride Eng. KTM non-split top clamp and stock 2008+ RMZ250/450 triple c...[Read More]
Our Price: $29.95 [Add to Cart]

RM Polyurethane Cones Soft

Fri, 15 Aug 2025 00:00:00 EST

Our yellow polyurethane cones are softer than the red ones for better dampening characteristics but still harder than stock to reduce handlebar twist. Four cones and four steel cupped washers included. They will work on all Ride Eng. RM/RMZ triple cl...[Read More]
Our Price: $29.95 [Add to Cart]

KTM/HUSQ Replacement Rubber Mounted Bar Mount 2022.5+

Fri, 15 Aug 2025 00:00:00 EST

This OEM replacement Bar Mount has a one-piece top that is designed to resist twisting without the added rigidity of the new stock bar mount's massive one piece lower. KTM went from the previous year's flimsy design to an overly stiff/heavy design in...[Read More]
Our Price: $99.95 [Add to Cart]

22.5+ KTM/HUSQ Longer Bolts for Bar Mount Spacers

Fri, 15 Aug 2025 00:00:00 EST

Kit includes two M10 x 1.5 x 60mm Allen Screws required for use with KTM/Husq bar mount spacers on 2022.5+ models....[Read More]
Our Price: $9.95 [Add to Cart]

22mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Black

Fri, 15 Aug 2025 00:00:00 EST

23.5mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Black

Fri, 15 Aug 2025 00:00:00 EST

Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 1.5mm back from stock for a better rider triangle. Ride Eng. also offers optional offset bases for our bar mounts providing 4 bar positi...[Read More]
Our Price: $799.90 [Add to Cart]

23.5mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Orange

Fri, 15 Aug 2025 00:00:00 EST

22mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Orange

Fri, 15 Aug 2025 00:00:00 EST

22mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Silver

Fri, 15 Aug 2025 00:00:00 EST

23.5mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Silver

Fri, 15 Aug 2025 00:00:00 EST

23.5mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp - Blue

Fri, 15 Aug 2025 00:00:00 EST

22mm Offset 2023-25 KTM/HUSQ Rubber Mounted Split Triple Clamp Set - Blue

Fri, 15 Aug 2025 00:00:00 EST

2023-25 KTM/HUSKY Steering Head Stabilizer Bracket Kit

Fri, 15 Aug 2025 00:00:00 EST

This behind the number plate steering damper bracket kit holds a WP or Showa damper and will fit all 2023+ models without a headlight. The concept was originally developed by Ricky Carmichael in his days as a factory Honda rider and it became a produ...[Read More]
Our Price: $249.95 [Add to Cart]

NEW! 2022.5+ KTM/Husq/Gas Bar Mount Fastener Kit

Fri, 15 Aug 2025 00:00:00 EST

This kit has all the replacement hardware that holds the stock ktm and husqvarna bar mount onto the stock billet aluminum triple clamps. (included: two M10 Cap screws, four polyurethane cones, two custom machined threaded sleeves). It will also drop ...[Read More]
Our Price: $59.95 [Add to Cart]

2022.5+ KTM & Husky Polyurethane Cones Firm

Fri, 15 Aug 2025 00:00:00 EST

These cones are made from polyurethane which is a firmer material than stock with good dampening characteristics. Fit all ktm and husqvarna rubber mounted stock billet aluminum triple clamps 2022.5+....[Read More]
Our Price: $29.95 [Add to Cart]

Post Mount Extension for Scott's & GPR Sub Mounts

Fri, 15 Aug 2025 00:00:00 EST

Precision machined from aircraft quality aluminum, this extension will convert your short post mount to a long post mount so that you can place your scott's or gpr over the handlebars. Use with Ride Eng. bar mounts: MX-SM100-00, MX-SM102-00 & MX-SM1...[Read More]
Our Price: $31.95 [Add to Cart]

NEW! WP Steering Damper Kit

Fri, 15 Aug 2025 00:00:00 EST

The new WP Damper has 30 clicks of adjustability as compared to 14 clicks (Showa Damper) giving it a wide range of adjustability and more resistance than the Showa Damper. Comes with a pair of stainless steel sleeves which makes it compatible with al...[Read More]
Our Price: $420.00 On Sale [Add to Cart]

KTM/Husky & Triumph Polyurethane Cones Soft

Fri, 15 Aug 2025 00:00:00 EST

These cones are made from polyurethane which is a more durable material than stock with similar dampening characteristics as the stock rubber version and 30% softer than our red cone kit. Installation and disassembly is far easier with these because ...[Read More]
Our Price: $24.95 [Add to Cart]

2022.5+ KTM & Husky Polyurethane Cones Soft

Fri, 15 Aug 2025 00:00:00 EST

These cones are made from polyurethane which is a more durable material than stock with the same dampening characteristics as the stock rubber version and 20% softer than our red cone kit. Installation and disassembly is far easier with these because...[Read More]
Our Price: $29.95 [Add to Cart]

23.5mm Offset 2023.5+ GasGas Rubber Mounted Split Triple Clamp - Red

Fri, 15 Aug 2025 00:00:00 EST

WP Damper spacers for 7mm bolts (1 pair)

Fri, 15 Aug 2025 00:00:00 EST

These stainless steel damper spacers allow the WP steering damper that has 8mm eyelets to mount up on all Ride Engineering steering damper brackets that use 7mm bolts. ...[Read More]
Our Price: $14.95 [Add to Cart]

KTM/HUSQ/GAS Replacement Bar Mount 2024+

Fri, 15 Aug 2025 00:00:00 EST

2023+ KTM/HUSQ/GAS 6mm offset bases

Fri, 15 Aug 2025 00:00:00 EST

These 6MM offset bases allow you to bring your Ride Eng. bar mount an extra 3mm closer or further away from your body. For use with Ride Eng. KTM and Husqvarna oversized bar mounts (KT-BBM23-CA or KT-BBM24-CA) only....[Read More]
Our Price: $39.95 [Add to Cart]

NEW! Scott's/GPR Compatible Bar Mount for KTM/Hus/Gas/Beta/Tri

Fri, 15 Aug 2025 00:00:00 EST

2022.5+ KTM/Husq/Gas Bar Mount Fastener Kit for all Ride Engineering Triple Clamps

Fri, 15 Aug 2025 00:00:00 EST

This kit is the same kit that comes with all RIde Engineering 2023+ ktm, husqvarna and gasgas triple clamps. (included: two M10 Cap screws, four round polyurethane cones, two custom machined threaded sleeves)....[Read More]
Our Price: $59.95 [Add to Cart]